Featured Artist: Patricia Baldwin Seggebruch
Miniature Delights: Patricia Baldwin Seggebruch experiments with Ampersand’s Encausticbord ATC’s
Ampersand first won my heart when I began translating my creative bent from mixed media work into encaustic on Claybord. The luminous white surface, solid foundation and delectable option of a 2" cradle all married beautifully with the ancient, yet contemporary feel of encaustic. Imagine my delight when I learned that Ampersand improved on this near-perfect relationship with new Encausticbord that offers the best of two worlds: R&F’s encaustic gesso paired with Ampersand’s expert wood panels and advanced coating technology.
The use of ATCs or “Artist Trading Cards” arose a few years ago as the next big art movement. Exploding on the scene, potentially as the next ‘here today, gone tomorrow’ trend, ATCs have managed to gain a permanent foothold. Ampersand has embraced this tradable palm-sized art form and I find myself embracing these miniature delights right back. I jump with both feet into Ampersand’s delicious Encausticbord ATCs! I adore R&F’s encaustic paints and mediums and put them to task here, along with Daniel Smith’s luscious oil paints. By choosing this triune of materials: Encausticbord, R&F Encaustic and Daniel Smith oils, I have assuredly set myself up for success!
To begin these paintings, and any paintings in encaustic, I first prime the board, though not in the traditional sense to which you may be accustomed. The priming is done with an initial layer of encaustic wax medium fused to the substrate with heat. Before applying this prime layer, I warm the Encausticbord first so that the wax will flow more evenly over the surface. This can be done by using a heat gun or by placing it on a hot plate/palette until the panel is warm to the touch. Use a natural bristle brush to quickly cover the panel with long smooth strokes that slightly overlap each other. Then, heat or “fuse” the whole surface to an even “wetness” and until there is a perfectly even film of wax covering the ground. Each layer of wax should be fused in this way before applying the next. For a few more basic tips on encaustic, visit: www.encausticcenter.com
For this project, I worked on multiple ATCs at once which gave me the opportunity to hang them as a multi-storied group or to hand them out as individual ATCs (fig.1).
After applying the initial priming layer, I placed chip board die cut letters over the entire group of 12 ATCs and sprayed alcohol inks over them to create stencil effects (fig. 2).
Once the ink dried, I removed the letters. Then, using a natural bristle brush, I applied a layer of R&F’s encaustic medium (made from beeswax and damar resin) (fig. 3).
I decided to paint stripes of R&F encaustic color across all the boards to unify them. I masked off the stripes with tape, painted them in with R&F color, then removed the tape while the wax was still tacky and then fused the layer (fig. 4).
I collaged in Daniel Smith decorative papers (encaustic medium being its own wonderful glue) and then I fused again. For soft glazes of color, I rubbed on Daniel Smith oil paints and then wiped them away to show relief texture. Lastly, I dropped a touch of metal fleck glitter inside simple metal circles and melted them into place (fig. 1) This collection was inspiring to create. Enjoy!